Rank Product Name Score
1 AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz V3.4 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz V3.4 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
AURSINC
9.5 GET ON AMAZON
2 【Upgraded】AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart(Latest Version REV3.4) 【Upgraded】AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart(Latest Version REV3.4)
AURSINC
9.1 GET ON AMAZON
3 NanoVNA-H4 Vector Network Analyzer Kit 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4" LCD Touch Screen (4.2 Version) NanoVNA-H4 Vector Network Analyzer Kit 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4″ LCD Touch Screen (4.2 Version)
Seesii
8.9 GET ON AMAZON
4 Network Scanner (WiFi LAN) Network Scanner (WiFi LAN)
Vishnu N K
8.8 GET ON AMAZON
5 NanoVNA SAA-2N V2.2 Vector Network Analyzer Metal Enclosure 4.0" inch with 3000mAh 50KHz -3.5GHz Measuring S Parameters, SWR, Phase, Delay, Duplexer, Smith Chart HF VHF UHF Antenna Spectrum Analyzer NanoVNA SAA-2N V2.2 Vector Network Analyzer Metal Enclosure 4.0″ inch with 3000mAh 50KHz -3.5GHz Measuring S Parameters, SWR, Phase, Delay, Duplexer, Smith Chart HF VHF UHF Antenna Spectrum Analyzer
Shenzhen HKCNMA Co., Ltd.
8.6 GET ON AMAZON
6 NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4" inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4″ inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart
Seesii
8.3 GET ON AMAZON
7 AURSINC NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4 Inch LCD 1950mAh 4.2 Version AURSINC NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4 Inch LCD 1950mAh 4.2 Version
AURSINC
8.3 GET ON AMAZON
8 Vector Network Analyzer, Elikliv Mini HF VHF UHF Antenna Analyzer with 10KHz-1.5GHz 2.8 Inch Digital LCD Display Touching Screen Standing Wave Measuring Instrument Vector Network Analyzer, Elikliv Mini HF VHF UHF Antenna Analyzer with 10KHz-1.5GHz 2.8 Inch Digital LCD Display Touching Screen Standing Wave Measuring Instrument
Elikliv
8.0 GET ON AMAZON
9 Nanovna 10KHz-1.5Ghz Vector Network Analyzer Kit,SEESII MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8" Touch Screen Nanovna 10KHz-1.5Ghz Vector Network Analyzer Kit,SEESII MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8″ Touch Screen
Seesii
7.7 GET ON AMAZON
10 Expert Speed Test WiFi Analyzer - analiti Expert Speed Test WiFi Analyzer – analiti
analiti LLC
7.6 GET ON AMAZON

AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz V3.4 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz V3.4 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

    Features:

  • This is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD display, portable with battery powered or USB powered
  • The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
  • The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
  • The metal shield is designed to reduce the external interference and improve the measurement accuracy
  • Package include NanoVNA host (with battery) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1

【Upgraded】AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart(Latest Version REV3.4)

【Upgraded】AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart(Latest Version REV3.4)

    Features:

  • UPGRADED: Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Added a case, which is protective and dust-proof.
  • IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
  • MULTIPLE FUNCTIONS: The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
  • STRONG AND SECURE POWER SUPPLY: This VNA is battery powered or USB powered; Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
  • Package include NanoVNA host (with battery) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1

NanoVNA-H4 Vector Network Analyzer Kit 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4″ LCD Touch Screen (4.2 Version)

NanoVNA-H4 Vector Network Analyzer Kit 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4" LCD Touch Screen (4.2 Version)

    Features:

  • →【 LASTEST UPGRADED VERSION 】 This NanoVNA-H4 with 4-inch LCD touchscreen,portable with 1950mAh battery rechargeabe powered or USB powered.Can last longer working time
  • →【 IMPROVED FREQUENCY ALGORITHM 】The Vector Network Analyzer can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • →【COMPACT PORTABLE & POWERFUL】 This Antenna Analyzer is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld.The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters (you need to manually replace the transceiver port wiring)
  • →【PC CONNECTION】 Using PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software
  • →【IMPROVED ACCURACY】 Comes with ABS plastic shell case,and use strong and secure power supply at the same time.Enhanced performance in all aspects

Network Scanner (WiFi LAN)

Network Scanner (WiFi LAN)

    Features:

  • lists all devices connected to your WiFi / LAN network.
  • Shows MAC address, Local IP address, Brand Name of all connected devices.
  • Runs on TV.

NanoVNA SAA-2N V2.2 Vector Network Analyzer Metal Enclosure 4.0″ inch with 3000mAh 50KHz -3.5GHz Measuring S Parameters, SWR, Phase, Delay, Duplexer, Smith Chart HF VHF UHF Antenna Spectrum Analyzer

NanoVNA SAA-2N V2.2 Vector Network Analyzer Metal Enclosure 4.0" inch with 3000mAh 50KHz -3.5GHz Measuring S Parameters, SWR, Phase, Delay, Duplexer, Smith Chart HF VHF UHF Antenna Spectrum Analyzer

    Features:

  • ✔➸ NanoVNA SAA-2N V2.2 4.0″ inch is a low cost 3GHz T/R vector network analyzer, designed in collaboration with OwOComm. The V2 hardware is a new from-scratch design and is not based on the original NanoVNA by edy555. Compared to the original NanoVNA, V2 does not use harmonics for measurements and achieves higher dynamic range.
  • ✔➸ The NanoVNA SAA-2N V2.2 4.0″ inch uses a similar user interface to the NanoVNA, but with a different technical architecture, It has more superior frequency than other nanovna, Frequency range: 50kHz – 3GHz, System dynamic range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz), S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
  • ✔➸ Sweep rate: 80-100 points/s, Maximum sweep points (on device): 201, Maximum sweep points (USB): 1024, Port 2 return loss (1.5GHz): 20dB typ, Port 2 return loss (3GHz): 13dB min.
  • ✔➸ This NanoVNA SAA-2N V2.2 4.0″ inch Built in 3000mAh battery, Package include SAA-2N host x 1, Micro USB data cable x1, 50cm N-type male to male RG142-PUR RF cable x2, N-type male Calibration kit – OPEN x1, N-type male Calibration kit – SHORT x1, N-type male Calibration kit – LOAD x1, N-type female to female connector x1, Touch Screen Paddles and lanyard x1, Touch Screen Pen x1, EVA Storage Bag x1,

NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4″ inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart

NanoVna SAA-2N VNA Antenna Analyzer,SEESII 50KHz -3GHz Vector Network Analyzer with Bag & Testboard Kit,4" inch LCD,HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio Smith Chart

    Features:

  • 【Upgraded NanoVNA SAA-2N V2.2 Version】Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test
  • 【Calibration 】The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
  • 【Improved Frequency Range】:transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz – 1.5GHz), 1.02(1.5GHz-3GHz)
  • 【 Improved Performance】High stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
  • 【What You Can Get】1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services

AURSINC NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4 Inch LCD 1950mAh 4.2 Version

AURSINC NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4 Inch LCD 1950mAh 4.2 Version

    Features:

  • IMPROVED TO LATEST VERSION, NanoVNA-H4 is upgraded to version 4.2, battery capacity upgraded to 1950mAh, rechargeable and USB powered by power supply or power bank. Last longer enough when working outside.
  • IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • PC CONTROLLED, Using PC software NanoVNA Saver, it can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.
  • MULTIPLY FUNCTIONS, The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. It is also compact and portable, convenient for carrying and using.
  • ENSURING ACCURACY, The metal shield is designed to reduce the external interference and improve the measurement accuracy. 4in Display will show you accurate curve and data, improving your using experience.

Vector Network Analyzer, Elikliv Mini HF VHF UHF Antenna Analyzer with 10KHz-1.5GHz 2.8 Inch Digital LCD Display Touching Screen Standing Wave Measuring Instrument

Vector Network Analyzer, Elikliv Mini HF VHF UHF Antenna Analyzer with 10KHz-1.5GHz 2.8 Inch Digital LCD Display Touching Screen Standing Wave Measuring Instrument

    Features:

  • ★【 Perfect DIY Product (Ver 3.4) 】: the Vector Network Analyzer provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD display, portable with battery powered or USB powered(battery Not included )
  • ★【 Improved Frequency Algorithm 】: the Antenna Analyzer can use the odd harmonic extension of the si5351 to support measurement frequencies up to 900MHz. The TX / RX method measures the complete S11 and S21 parameters. If you need to get S12 and S22, you need to manually replace the transceiver port wiring.
  • ★【Metal Shield Designed】: the HF VHF UHF UV VNA Antenna Analyzer with metal shield design which reduce the external interference and improve the measurement accuracy.
  • ★【10KHz-1.5GHz Frequency Algorithm 】: The si5351 direct output in the 50k-300MHz frequency range provides better than 70dB of dynamics, the extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
  • ★【Small and Portable, Easy to Use】: Unit is designed to Original Equipment (OE) fit, form and function Simple and practical PC control software, we can export Touchstone (snp) files for various radio design and simulation software through PC software.

Nanovna 10KHz-1.5Ghz Vector Network Analyzer Kit,SEESII MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8″ Touch Screen

Nanovna 10KHz-1.5Ghz Vector Network Analyzer Kit,SEESII MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8" Touch Screen

    Features:

  • Unit is designed to fit for Original Equipment, form and function Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software.
  • The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
  • The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
  • Requirements accomplished by leveraging Spectra Premium’s OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change.Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.
  • This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.

Expert Speed Test WiFi Analyzer – analiti

Expert Speed Test WiFi Analyzer - analiti

    Features:

  • Internet and iPerf3 speedtests
  • Wireless coverage analysis
  • WiFi scanner and channel maps (inc. beacon decodes)
  • LAN connected device scanner – who’s using the network

As an Amazon Associate I earn from qualifying purchases.

Random products:

dawn powerwash spray
david goggins