Smooth-On OOMOO 25 – FAST Curing Mold Making Silicone Kit – 2 Pints – EASY!

Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY!

    Features:

  • Easy to use 1:1 by volume ratio . No scale required.
  • Oomoo 25 – Fast setting 75 minute cure time. For quick turnover of molds. Sets FASTER than Oomoo 30.
  • Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!
  • Great for craft moldmaking, candles, replicas, home remodeling, jewelry, and more!
  • East to use, equal parts A and B. Degassing is not necessary. Cures at room temperature.

Smooth-on OOMOO 30 – Bulk LOT – 1 Case with 4 Kits – 8 Pints Total Silicone

Smooth-on OOMOO 30 - Bulk LOT - 1 Case with 4 Kits - 8 Pints Total Silicone

    Features:

  • 1 case containing 4 pre-packages kits
  • For making exact copies of original models, etc
  • No vacuum de-gassing required
  • super easy to use!
  • tin cure silicone

Smooth-On OOMOO 25 Silicone Moldmaking Rubber – Trial Unit

Smooth-On OOMOO 25 Silicone Moldmaking Rubber - Trial Unit

    Features:

  • Smooth-On Oomoo 25 Silicone Rubber, 2.8 lbs

Smooth-On OOMOO 25 – BULK of 1 CASE 4 KITS

Smooth-On OOMOO 25 - BULK of 1 CASE 4 KITS

    Features:

  • Oomoo 25 – Fast setting 75 minute cure time
  • For quick turnover of molds
  • cast with smooth-cast, plaster or resin
  • great for bondo transfers!!!
  • East to use, equal parts a and b. No vacuum degassing required

Smooth-On Silicone Mold Making, Liquid Rubber , Easy to Use – Trial Size 2.8 lb

Smooth-On Silicone Mold Making, Liquid Rubber , Easy to Use - Trial Size 2.8 lb

    Features:

  • MIX RATIO: 1A:1B BY VOLUME – Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessary *Packaging may vary*
  • SHORE A HARDNESS: 30 – This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
  • POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS – This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see “For Best Results” section below
  • LOW VISCOSITY FOR EASY MIXING AND POURING – Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
  • PERFECT FOR ART AND INDUSTRIAL APPLICATIONS – Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax

Smooth-Cast 300 Liquid Plastic Compound – Trial Unit

Smooth-Cast 300 Liquid Plastic Compound - Trial Unit

    Features:

  • Ultra-low viscosity casting resin with bright white color
  • Vacuum degassing is not necessary to yield castings that are virtually bubble free.
  • Pot Life: 3 minutes; Cure Time: 10 minutes
  • Shore 70D
  • Mix Ratio: 1A: 1B by Volume

Mold Star 15 Slow Moldmaking Silicone Rubber – Trial Unit

Mold Star 15 Slow Moldmaking Silicone Rubber - Trial Unit

    Features:

  • Tear Resistant – Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*
  • Heat Resistant – Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys
  • Curing – Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding.
  • Vacuum Degassing – Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber
  • Mold Performance – The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment

ComposiMold Used 3lbs Reusable Mold Making

ComposiMold Used 3lbs Reusable Mold Making

    Features:

  • 100% reusable mold making material.
  • Used, filtered ComposiMold, Works like new, but it is not food contact safe.
  • Works great with Resins like ComposiCast, ComposiMold-Plaster, and more.
  • Colors and shapes may vary from photos.

Epoxy Resin Kit – 34 oz Crystal Clear Epoxy Resin for Art Coating Casting Jewelry Making, River Table, Countertop, Cheeseboard, Tumbler – UV Resistant & Food Safe – Craft Resin Starter Kit

Epoxy Resin Kit - 34 oz Crystal Clear Epoxy Resin for Art Coating Casting Jewelry Making, River Table, Countertop, Cheeseboard, Tumbler - UV Resistant & Food Safe - Craft Resin Starter Kit

    Features:

  • ✅ BEAUTIFUL RESULT: Designed to look gorgeous, strong and durable. crystal clear epoxy, amazing clear cast , deep pour. Craft Resin increases the attractiveness and value of whatever it’s used on!
  • ✅ ALL IN ONE KIT: This kit will give you everything you need to get started with Craft Resin – 500ml/17Oz epoxy resin and 500ml/17Oz hardener; reusable mixing stick and gloves
  • ✅ CRYSTAL CLEAR: Cures clear to a glass-like finish.
  • ✅ EASY TO USE: Craft Resin is self-leveling, its 1:1 mixing ratio, simply mix two part epoxy: resin and hardener by volume.
  • ✅ SAFE: Craft Resin is UV resistant, Food safe, Non-toxic. No VOCs. No solvents. Odorless. Non-flammable. Non-hazardous

As an Amazon Associate I earn from qualifying purchases.

Random products:

safety vest for men big and tall
vsr10 magazine